Gravel calculator

Calculate cubic yards of gravel for a driveway base, patio base or bed, with a 10% waste factor and bag counts.

Volume
–
Cubic yards
–
0.5 cu ft bags
–

Depth is in inches. A 2–3 inch layer is common for mulch; gravel bases are often 3–4 inches; topsoil is often 4–6 inches. 10% waste covers irregular beds.

Need a pad poured first?

If you are topping or bordering a concrete slab, size the concrete separately with the concrete calculator.

Get a local quote

How the volume is calculated

A 3–4 inch compacted gravel layer is a common base under concrete or pavers; deeper sections are used under heavier loads. Cubic yards = length × width × (depth in inches ÷ 12) ÷ 27, after your waste percentage. A 10% waste factor is a reasonable starting point for irregular beds.

Common questions

How much gravel do I need?

Length × width × depth (in inches ÷ 12), plus waste, then divide by 27 for cubic yards.

How deep should a gravel base be?

Many patio and driveway bases start at 3–4 inches compacted; your contractor may spec more.

How many bags is a yard of gravel?

It depends on the bag size. This tool also reports 0.5 cubic foot bags as a common small-bag size.