Fence post concrete calculator
How many bags of concrete you need to set fence, deck or mailbox posts, with the post subtracted from the hole and Utah frost depth in mind.
- Free, no sign-up
- Bag math from QUIKRETE data sheets
- Wasatch Front prices you can edit
- Share, print or total several pours
–50 lb bags of fast-setting or concrete mix, all posts
- Concrete per post
- –
- Total concrete
- –
Concrete = hole volume minus the buried part of the post. Bag counts use QUIKRETE yields (50 lb ≈ 0.375, 60 lb ≈ 0.45, 80 lb ≈ 0.60 cu ft) and round up. The default bag price is one big-box listing for QUIKRETE 50 lb Fast-Setting in November 2026; enter yours.
Rather have a crew set them?
Get a quote from contractors who service Salt Lake, Davis, Weber and Utah counties.
Get a concrete quoteA worked example
Ten 4×4 posts in 10-inch holes, 30 inches deep, filled to 3 inches below grade: each hole holds π × (5 ÷ 12)² × (27 ÷ 12) ≈ 1.23 cubic feet; the post takes (3.5 ÷ 12)² × 2.25 ≈ 0.19 cubic feet. That leaves about 1.04 cubic feet of concrete per post, or 2.8 bags of 50 lb mix. For ten posts plus 10% extra, buy 31 bags.
Depth, frost and Utah soil
Most Wasatch Front building departments, including Salt Lake City, Salt Lake County's municipal services district, Provo and Ogden, publish a 30-inch frost depth for footings. Fences usually are not held to that number, but a post that bottoms out above frozen ground can heave. Bell the bottom of the hole slightly wider than the top, set a few inches of gravel under the post for drainage, and crown the concrete so water runs away from the wood. See frost line depth in Utah for the city list.
Before you dig, request free utility marking from Blue Stakes of Utah (811). For the fence materials themselves, the fence calculator counts posts, rails and pickets.
Related tools
Common questions
How many bags of concrete per fence post?
For a 4×4 in a 10-inch hole about 30 inches deep, plan on roughly 3 bags of 50 lb fast-setting mix per post. QUIKRETE's own rule of thumb is two 50 lb bags for a 3-inch post in a 9-inch hole 30 inches deep; our volume math for that hole comes to about 2.5 bags, so buy a spare.
How deep should fence posts be in Utah?
There is no code depth for most fences, but setting posts below the frost line limits heaving. Most Wasatch Front building departments publish a 30-inch frost depth. A common rule is to bury about one-third to one-half of the post's above-ground height, so a 6-foot fence often gets posts 2 to 3 feet deep.
How wide should the hole be?
QUIKRETE suggests a hole about three times the post width: roughly 10 to 12 inches for a 4×4.
Fast-setting or regular concrete mix?
Fast-setting mix is poured dry into the hole and soaked, and sets in 20 to 40 minutes, so it is the usual choice for posts. Regular concrete mix is mixed first and is fine too; the bag counts here work for either, using QUIKRETE yields.
Do I need to call before digging?
Yes. Utah's 811 center, Blue Stakes of Utah, marks buried utilities for free. Request marking a few days before you dig.
Sources
- QUIKRETE Fast-Setting Concrete Mix data sheet (yields; hole 3× post width; 2 bags for a 3 in post in a 9 in × 30 in hole): www.quikrete.com
- QUIKRETE Concrete Mix #1101 data sheet (60 and 80 lb yields): www.quikrete.com
- Salt Lake City design criteria (frost depth 30 in): www.slc.gov
- Blue Stakes of Utah 811: www.bluestakes.org